BS-C067-62 Push Through Center Caps for Truck or Trailer Wheels Rims
Carbon Steel/Stainless steel construction provides optimal durability and protection against rust and corrosion.
This center cap will fit most standard wheels with a 67mm center bore - For trucks and SUVs.
Height: 62mm, outer Diameter: 67mm
This center cap is very easy to install onto your vehicle. Simply push the center cap through your existing rim center hole - no special tools required.
1.Jack up the vehicle. While some wheel covers can be installed without removing lug nuts, you may often find that the lug nuts on your wheel are intended to help hold the wheel cover in place. If need to remove the lug nuts on the wheel, first loosen the lug nuts, then jack the car up.
Always jack your vehicle up on solid, level surfaces like blacktop or concrete.
Place jack stands beneath the vehicle once you jack it up for safety.
2.Remove the lug nuts. Use a tire iron or socket wrench to completely unscrew the lug nuts holding the wheel onto your vehicle. Set the lug nuts aside for you to use when mounting the wheel back onto the vehicle.
Turn the lug nuts counter-clockwise to unscrew them.
Be careful not to misplace any lug nuts. It is not safe to drive your vehicle with fewer than the provided amount of lug nuts.
3.Line up the ring indent with the valve stem. The retention ring on the back of the wheel cover will have an indentation in it, as well as a hole through the wheel cover in the same area. This gap is intended to allow the valve stem to pass through the cover for you to access when adding air to your tires.
Be sure to align the gap in the cover and retention ring with the valve stem so it can pass through.
Many wheel covers will have a drawing of a valve stem on the back intended to help you identify where the valve stem passes through.
4.Press the wheel cover directly onto the wheel. With the valve stem properly aligned through the wheel cover, press the wheel cover directly onto the wheel. If you did not need to remove your lug nuts, the wheel cover should pop into place and not come back off the wheel easily.
If you do not need to use lug nuts to secure the wheel cover, pull on it a bit to ensure it will not come off while driving.
The wheel cover should not feel loose, nor should it be easily pulled off.
5.Screw on the lug nuts. If you removed the lug nuts previously, use your hands to thread each nut onto a lug stud passing through the wheel and wheel cover. Once you are confident the lug nuts are properly threaded, use a wrench or tire iron to tighten them.
Be sure to re-tighten the lug nuts once you lower the vehicle down off of the jack.
Be sure all lug nuts are tight before attempting to drive the vehicle.
Beishuo Hardware is specialized in auto parts,ABS nut cover,axle cover,mud flap hanger,exhaust pipe,wheel nut,wheel bolt,wheel spacer,tools,socket set,spanner, construction hardwares,anchor bolt,corner bracket. Our products are in comprehensive range of articles and offers at reasonable price.
BEISHUO adheres to quality first, stresses on quality management, and adhere to people oriented policy and continued innovation. BEISHUO strictly carries out ISO9001: 2000 quality management standard and keeps developing new products to satisfy market demands. The products are exported to Europe, US, Middle East and other countries and regions, and deeply favored by domestic and foreign clients.
We Operate under the principle of "Better quality, Better price and Better cooperation". BEISHUO wholeheartedly welcome honored guests both at home and board to business negotiation.
Q1: Where is your company, how can I visit there?
A: Our company is in Ningbo city, it is close to Ningbo and Shanghai part. If you arrive in Shanghai or Ningbo or Hangzhou airport, we can pick you up there by car.
Q2: What is your loading port?
A: Ningbo port is the first choice ; But if you have other requirements, we also can load at the other ports, such as Shanghai or any other port.
Q3: what is your Delivery time?
A: Our regular production time is 25-45 days. Delivery time normal is 15-45 days after receiving prepayment
Q4: What is your payment terms?
A: We can accept the terms of T/T, L/C, Paypal,or other terms.
Q5: Can we use our logo or design?
A: We can help laser your logo on product, but you eill send your design artwork.
